Drywall Installation in Edison, NJ
Edison Drywall hangs and finishes gypsum board, the 1/2" and 5/8" panels that form the interior walls and ceilings of nearly every Edison home, on additions, gut renovations, and new framing.
How a hang is laid out
Board runs perpendicular to the framing so seams land on stud centers and fall away from door and window corners, where movement concentrates. Ceilings go up first, walls tight to them, screws set to depth rather than dimpled through the face paper. On 24" o.c. ceiling framing we specify 5/8" board to stop the sag that shows up under raking light a year later.
Board specification by room
Living space takes standard 1/2" board. Garage-to-house separations take at least 1/2" board on the garage side, and where rooms sit above the garage the separation must be a one-hour rated assembly, commonly built with 5/8" Type X. Bathrooms, laundry rooms, and basement perimeters take moisture-resistant board, with cement board behind tile. We confirm the assembly against the plan before a single sheet is cut.
Additions and second-floor build-outs
Full room hangs coordinated around the electrical and insulation inspections so the crew is not waiting on trades.
Gut renovations
Demolition debris out, framing checked for plumb and crown, then hang, tape, and finish to a paint-ready surface.
Ceilings only
Removal and replacement of failed plaster or water-stained board without disturbing the wall finish.
- Hang, tape, finish, and sand to a paint-ready surface
- Level 4 standard, Level 5 on request
- Screw pattern and seam layout to code
- Seams kept off door and window corners
What customers say
Highly recommend! Ralph did a great job in my basement. Great quality work!
Ralph and his assistant were outstanding. Punctual, neat, professional. They rebuilt badly cracked plaster, I would hire them again.
Ralph is punctual, responsible, and works very well. Drywall repair plus painting, highly recommend Mega Fame.
Towns we work in
Based in Edison and working roughly 25 miles out.